GDV Utilities
Los Angeles, CA · Los Angeles County

Temporary power poles
in Los Angeles.

GDV Utilities installs temporary power poles for new homes, ADUs, remodels and commercial sites in Los Angeles, and upgrades panels for solar and EV chargers. We pull the permit, handle the LADWP service request and meet the inspector.

Serving utilityLADWP
Temp panel sizes100A or 200A
Turnaround3–5 business days after permit and utility approval
LicensedCalifornia license A & C-10 #1163710
Los Angeles temporary power

How it works in Los Angeles

One call covers the permit, the utility, installation, inspection and removal.

1. Permit

We pull the electrical permit with the Los Angeles Department of Building and Safety (LADBS) and schedule the inspection.

2. Utility service request

The Los Angeles Department of Water and Power (LADWP) serves the City of Los Angeles, including the San Fernando Valley, Hollywood, the Westside and South LA. We submit the request, and the utility planner sets the pole location.

3. Install, inspect, energize

We set and wire the pole with a 100A or 200A panel, meet the inspector, and the utility sets the meter and energizes.

Local note: Inside LA city limits, LADBS issues the electrical permit and has its own rules for temporary poles, and LADWP sets the service point and meter. Many lots in the hills and the Palisades also need a clear path for LADWP crews, so we plan the pole location around access.
LADBS & LADWP

Temp power rules in the City of Los Angeles

Inside LA city limits, two city departments approve temporary power: LADBS issues the permit and inspects, and LADWP sets the meter.

StepWhoWhat happens
1. PermitLADBSTemporary service permit pulled under our license
2. Service applicationLADWPApplication with the LADBS permit number, amps, voltage, phase and overhead or underground service
3. Pole and meter socketGDV UtilitiesInstalled to LADWP’s Electric Service Requirements and the LADBS temporary pole rules
4. Final inspectionLADBSWe meet the inspector; approval is released to LADWP
5. Meter and energizeLADWPAbout 7 to 10 business days after LADBS final approval, per LADWP

Small vs. larger services. LADWP’s small temporary service process covers 200 amps or less, single phase, where overhead lines are available. Larger or three-phase temporary services go through LADWP’s temporary and construction service process instead, which takes longer to plan.

What LADBS checks on the pole. Under LADBS Information Bulletin P/EC 2020-010, a wood pole is at least 20 feet long and set at least 4 feet deep; the grounding uses two electrodes driven 8 feet and spaced at least 6 feet apart unless one rod tests at 25 ohms or less; and 15, 20 and 30 amp 120-volt receptacles need GFCI protection and weather-resistant, extra-duty covers. We build every LA pole to these rules so it passes the first time.

Is your address LADWP? LADWP serves the City of Los Angeles, including the San Fernando Valley, Hollywood, the Westside, South LA, San Pedro and the Palisades. Nearby cities are different: Burbank, Glendale and Pasadena run their own utilities, and most other Los Angeles County cities, such as Santa Monica, Culver City and West Hollywood, are served by SCE. We confirm the utility for your address before we quote.

Local crew, local office. GDV Utilities is based at 7020 Hayvenhurst Ave in Van Nuys, inside the City of Los Angeles, so LA jobs are close to home.

Sources: LADWP small temporary electric service request · LADBS Information Bulletin P/EC 2020-010 (PDF)

Panel & service upgrades

Solar & EV panel upgrades in Los Angeles

Main panel and service upgrades sized for solar, battery storage and EV chargers, including trenching.

Load review

We check your existing panel and service against your solar, battery or EV plans and size the upgrade correctly.

Panel and service upgrade

New main panel or meter main, service conductors and trenching for underground runs and charger feeds.

Utility coordination

We schedule the disconnect and reconnect with LADWP and handle the paperwork start to finish.

Neighborhoods

Where we work in Los Angeles

Plus the rest of Los Angeles and nearby communities in Los Angeles County.

Van NuysSherman OaksEncinoNorth HollywoodStudio CityNorthridgeWoodland HillsPacific PalisadesHollywoodSilver LakeWestchesterSan Pedro
Comparing quotes?

Why our quote looks different

A low temporary power quote often covers the pole and little else. Ours covers the whole job, from permit to removal.

Included in a GDV Utilities quote

  • Electrical permit pulled for you
  • Utility service request and planner coordination
  • Pole, meter base and 100A or 200A panel, installed
  • Inspection scheduled and attended
  • Removal when permanent power is on
  • Rental or purchase option
  • Licensed: CA A & C-10 #1163710, bonded and insured

Often extra or left out of low quotes

  • Permit left to the builder
  • “Customer to coordinate with utility”
  • Panel or meter base sold separately
  • Trip charges when an inspection fails
  • Removal billed later, at a new price
  • One option only
  • Unlicensed or handyman installs

Have another quote? Send it with your request and we’ll show you, line by line, what each one includes.

FAQ

Los Angeles temporary power questions

How long does LADWP take to energize a temporary pole?

LADWP says it installs the meter and energizes the service about 7 to 10 business days after LADBS gives final inspection approval. We schedule the inspection as soon as the pole is set, so that clock starts as early as possible.

Is my Los Angeles address served by LADWP or SCE?

Addresses inside the City of Los Angeles are served by LADWP. Burbank, Glendale and Pasadena have their own utilities, and most other Los Angeles County cities, such as Santa Monica, Culver City and West Hollywood, are served by SCE. We confirm it for your address before quoting.

Are you a local Los Angeles contractor?

Yes. GDV Utilities is based in Van Nuys, inside the City of Los Angeles, and installs temporary power poles across LA, the San Fernando Valley and Los Angeles County.

Which utility serves my job site in Los Angeles?

The Los Angeles Department of Water and Power (LADWP) serves the City of Los Angeles, including the San Fernando Valley, Hollywood, the Westside and South LA. We confirm the serving utility for your address before we quote.

Who pulls the permit for a temporary power pole in Los Angeles?

We do. GDV Utilities pulls the electrical permit with the Los Angeles Department of Building and Safety (LADBS), submits the utility service request and meets the inspector. Permit fees are priced separately after the job is signed.

How fast can you install a temporary power pole?

Typically 3 to 5 business days after the permit is issued and the utility approves the service location. The utility schedules the meter set and energization.

What size temporary panel do I need?

Most single-family homes and ADUs use a 100A or 200A temporary panel. We size it to your tools, trailers and site loads when we quote.

Is removal included?

Yes. We remove the pole once your permanent service is on. We can quote a rental or a purchase option for your temporary power pole, so you can choose what fits the length of your project.

Do you do solar and EV panel upgrades in Los Angeles?

Yes. We upgrade main panels and services for solar, batteries and EV chargers, including trenching, and coordinate the disconnect and reconnect with LADWP. GDV Utilities holds California license A & C-10 #1163710.

Contact

Need power on a Los Angeles job?

Send the job address and a photo showing the nearest utility pole. We reply within one business day.

Free: Temp Power Checklist
Permit to energize in six steps, plus who serves your lot and what causes delays.
Get the checklist