GDV Utilities installs temporary power poles for new homes, ADUs, remodels and commercial sites in Los Angeles, and upgrades panels for solar and EV chargers. We pull the permit, handle the LADWP service request and meet the inspector.
One call covers the permit, the utility, installation, inspection and removal.
We pull the electrical permit with the Los Angeles Department of Building and Safety (LADBS) and schedule the inspection.
The Los Angeles Department of Water and Power (LADWP) serves the City of Los Angeles, including the San Fernando Valley, Hollywood, the Westside and South LA. We submit the request, and the utility planner sets the pole location.
We set and wire the pole with a 100A or 200A panel, meet the inspector, and the utility sets the meter and energizes.
Inside LA city limits, two city departments approve temporary power: LADBS issues the permit and inspects, and LADWP sets the meter.
| Step | Who | What happens |
|---|---|---|
| 1. Permit | LADBS | Temporary service permit pulled under our license |
| 2. Service application | LADWP | Application with the LADBS permit number, amps, voltage, phase and overhead or underground service |
| 3. Pole and meter socket | GDV Utilities | Installed to LADWP’s Electric Service Requirements and the LADBS temporary pole rules |
| 4. Final inspection | LADBS | We meet the inspector; approval is released to LADWP |
| 5. Meter and energize | LADWP | About 7 to 10 business days after LADBS final approval, per LADWP |
Small vs. larger services. LADWP’s small temporary service process covers 200 amps or less, single phase, where overhead lines are available. Larger or three-phase temporary services go through LADWP’s temporary and construction service process instead, which takes longer to plan.
What LADBS checks on the pole. Under LADBS Information Bulletin P/EC 2020-010, a wood pole is at least 20 feet long and set at least 4 feet deep; the grounding uses two electrodes driven 8 feet and spaced at least 6 feet apart unless one rod tests at 25 ohms or less; and 15, 20 and 30 amp 120-volt receptacles need GFCI protection and weather-resistant, extra-duty covers. We build every LA pole to these rules so it passes the first time.
Is your address LADWP? LADWP serves the City of Los Angeles, including the San Fernando Valley, Hollywood, the Westside, South LA, San Pedro and the Palisades. Nearby cities are different: Burbank, Glendale and Pasadena run their own utilities, and most other Los Angeles County cities, such as Santa Monica, Culver City and West Hollywood, are served by SCE. We confirm the utility for your address before we quote.
Local crew, local office. GDV Utilities is based at 7020 Hayvenhurst Ave in Van Nuys, inside the City of Los Angeles, so LA jobs are close to home.
Sources: LADWP small temporary electric service request · LADBS Information Bulletin P/EC 2020-010 (PDF)
Main panel and service upgrades sized for solar, battery storage and EV chargers, including trenching.
We check your existing panel and service against your solar, battery or EV plans and size the upgrade correctly.
New main panel or meter main, service conductors and trenching for underground runs and charger feeds.
We schedule the disconnect and reconnect with LADWP and handle the paperwork start to finish.
Plus the rest of Los Angeles and nearby communities in Los Angeles County.
A low temporary power quote often covers the pole and little else. Ours covers the whole job, from permit to removal.
Have another quote? Send it with your request and we’ll show you, line by line, what each one includes.
LADWP says it installs the meter and energizes the service about 7 to 10 business days after LADBS gives final inspection approval. We schedule the inspection as soon as the pole is set, so that clock starts as early as possible.
Addresses inside the City of Los Angeles are served by LADWP. Burbank, Glendale and Pasadena have their own utilities, and most other Los Angeles County cities, such as Santa Monica, Culver City and West Hollywood, are served by SCE. We confirm it for your address before quoting.
Yes. GDV Utilities is based in Van Nuys, inside the City of Los Angeles, and installs temporary power poles across LA, the San Fernando Valley and Los Angeles County.
The Los Angeles Department of Water and Power (LADWP) serves the City of Los Angeles, including the San Fernando Valley, Hollywood, the Westside and South LA. We confirm the serving utility for your address before we quote.
We do. GDV Utilities pulls the electrical permit with the Los Angeles Department of Building and Safety (LADBS), submits the utility service request and meets the inspector. Permit fees are priced separately after the job is signed.
Typically 3 to 5 business days after the permit is issued and the utility approves the service location. The utility schedules the meter set and energization.
Most single-family homes and ADUs use a 100A or 200A temporary panel. We size it to your tools, trailers and site loads when we quote.
Yes. We remove the pole once your permanent service is on. We can quote a rental or a purchase option for your temporary power pole, so you can choose what fits the length of your project.
Yes. We upgrade main panels and services for solar, batteries and EV chargers, including trenching, and coordinate the disconnect and reconnect with LADWP. GDV Utilities holds California license A & C-10 #1163710.
Send the job address and a photo showing the nearest utility pole. We reply within one business day.